Neutrik - NP2XL 6.35mm 2-Pole Mono jumboPLUG – For Cable up to 10mm O.D.

Build professional heavy-duty instrument and loudspeaker cables with the Neutrik NP2XL 6.35mm (¼-inch) Mono jumboPLUG, specifically designed for thick professional audio cables with an outside diameter of up to 10mm.

The NP2XL is Neutrik’s oversized professional 2-pole phone plug for applications where standard 6.35mm plugs simply cannot accommodate the required cable diameter.

Part of Neutrik’s jumboPLUG range, the NP2XL incorporates proven features from the professional PX Series, including:

• 6.35mm / ¼-inch professional phone plug
• 2-pole TS / mono configuration
• Cable O.D. up to 10mm
• Maximum conductor size 1.0mm² / 18 AWG
• Heavy-duty die-cast shell
• Nickel finish
• Nickel contacts
• Professional chuck-type strain relief
• Ergonomic enlarged barrel
• Precision-machined one-piece contact construction
• Solder termination
• More than 1,000 mating cycles
• IEC 60603-11 / EIA RS-453 compliance

The NP2XL is particularly useful for:

• Heavy-duty instrument cables
• Large-diameter guitar cables
• Bass guitar cables
• Equipment-specific loudspeaker cables
• Amplifier connections
• Touring cable systems
• Live sound
• Theatre
• Recording studios
• Broadcast
• Film and television
• Professional AV
• Equipment-hire inventory
• Custom cable manufacturing
• Professional cable repair

Neutrik jumboPLUG

Neutrik developed the jumboPLUG specifically for thick instrument and loudspeaker cables.

Standard professional 6.35mm plugs are generally designed around relatively modest cable diameters.

The NP2XL expands that capability to:

Up to 10mm cable O.D.

This makes it a useful solution where a heavy-duty cable cannot physically fit into a standard PX-series plug.

Rather than forcing an oversized cable into a connector designed for a smaller jacket, the NP2XL provides:

• A larger cable entry
• Appropriate chuck-style strain relief
• An ergonomic enlarged barrel
• Professional solder termination

for purpose-built large-diameter cable assemblies.

6.35mm / ¼-Inch Connector

The NP2XL uses the standard professional:

6.35mm / ¼-inch phone plug format.

It is compatible with equipment designed for the corresponding conventional 6.35mm TS jack connection.

The correct dimensional terminology is:

6.35mm

rather than:

• 6.5mm
• 6mm
• “large jack”

although customers may use those informal terms when searching.

2-Pole TS / Mono Configuration

The NP2XL is a:

2-pole connector

using the conventional:

Tip / Sleeve – TS

configuration.

This is commonly described as a:

Mono jack plug.

The two electrical contacts are conventionally:

Tip – Signal
Sleeve – Return / shield

depending on the equipment and application.

Always confirm the wiring required by the connected equipment before assembling the cable.

Designed for Thick Professional Cables

The defining feature of the NP2XL is its ability to accept cables with an outside diameter of:

Up to 10mm.

This is substantially larger than many conventional 6.35mm professional jack plugs.

It can therefore be useful with:

• Heavily jacketed instrument cable
• Rugged touring cable
• Large-diameter custom audio cable
• Equipment-specific speaker cable
• Specialised production cable assemblies

The cable must still be electrically and mechanically appropriate for the intended application.

Cable diameter alone does not determine suitability.

When a Standard NP2X Is Too Small

Neutrik’s standard NP2X Plug X connector is designed around smaller professional cable.

The NP2XL exists specifically for situations where a larger cable is required.

NP2X

Best suited to conventional professional instrument and audio cable.

Typical cable range:

4–7mm O.D.

NP2XL

Designed for large-diameter cable.

Maximum cable diameter:

Up to 10mm O.D.

If your selected cable is too large for the standard NP2X strain-relief system, the NP2XL may be the more appropriate connector.

Not Simply an Oversized Boot

The NP2XL is purpose-designed as a jumbo professional plug rather than simply attaching a larger rear boot to a standard connector.

Neutrik describes the jumboPLUG as having an:

Ergonomic barrel

and incorporating the proven features and benefits of its standard PX range.

The larger construction provides the physical room required to properly terminate and restrain thicker cables.

Ergonomic Barrel

Neutrik specifically identifies the NP2XL’s:

Ergonomic design for best handling convenience.

The enlarged barrel can be particularly useful during:

• Cable assembly
• Connection
• Disconnection
• Field servicing

when working with physically larger and heavier cable.

Professional Chuck-Type Strain Relief

The NP2XL incorporates Neutrik’s proven:

Chuck-type strain relief.

The chuck grips the cable jacket mechanically inside the connector.

This helps transfer pulling and movement forces into the connector body rather than allowing them to act directly on the soldered electrical conductors.

That is particularly important with large-diameter cable because thicker cable assemblies can impose greater mechanical loads on the connector.

Protecting the Solder Joints

Without effective strain relief, cable pulling and repeated movement may place stress directly on the conductor terminations.

Over time this can contribute to:

• Broken conductors
• Intermittent connections
• Failed solder joints
• Cable faults

The chuck strain-relief system is designed to provide reliable cable retention independently of the solder connections.

Maximum Conductor Size

Neutrik specifies:

1.0mm²

or:

18 AWG

as the maximum conductor size for the NP2XL.

This specification is particularly important when selecting thicker cable.

A cable may have an outside diameter below 10mm but still contain conductors larger than the connector can accept.

Always check both:

• Cable O.D.
• Individual conductor size

before selecting the connector.

Instrument Cables

The NP2XL can be particularly useful for heavy-duty instrument cables using an oversized outer jacket.

Potential applications include:

• Electric guitar
• Bass guitar
• Keyboard equipment
• Effects systems
• Instrument racks
• Stage systems

where the equipment specifically requires a 6.35mm TS connection.

Guitar Cables

Most guitar cables do not require a 10mm connector.

However, premium or unusually rugged instrument cables can use:

• Thick outer jackets
• Additional mechanical reinforcement
• Larger cable constructions

that exceed the capacity of a standard jack plug.

In those situations, the NP2XL provides a professional Neutrik solution without forcing the cable into an undersized strain relief.

Bass Guitar Cables

The same applies to professional bass leads.

Where a larger-diameter instrument cable is being used, the NP2XL provides a rugged field-serviceable connector while retaining the standard ¼-inch TS interface required by compatible instruments and amplifiers.

Loudspeaker Cable Applications

Neutrik specifically describes the NP2XL as a professional plug for:

Thick instrument and loudspeaker cables.

Some audio equipment uses 6.35mm TS connectors for speaker-level connections.

Potential applications may include:

• Legacy amplifier outputs
• Instrument amplifiers
• Speaker cabinets
• Equipment-specific audio systems

However, suitability must always be determined by the actual equipment.

Important Speaker-Cable Considerations

A 6.35mm plug should not automatically be used for any loudspeaker connection simply because it accepts thick cable.

Neutrik specifies the NP2XL’s:

Rated current per contact as dependent on the mating connector.

Therefore the safe capability of the complete connection depends on:

• NP2XL plug
• Mating jack socket
• Cable conductor size
• Equipment output
• Loudspeaker load
• Operating conditions

Always follow the amplifier or loudspeaker manufacturer’s specified connector requirements.

Modern Professional PA Systems

For contemporary high-power professional PA systems, dedicated locking loudspeaker connectors such as speakON are generally more appropriate than conventional 6.35mm plugs.

The NP2XL remains useful where the actual amplifier or loudspeaker equipment has been specifically designed to use a 6.35mm TS interface.

It should not be used to convert equipment away from the connector system specified by its manufacturer.

Amplifier Connections

Potential amplifier applications include:

• Instrument amplifier inputs
• Equipment-specific speaker outputs
• Effects loops
• Unbalanced line-level connections
• Legacy professional audio hardware

Always identify whether the jack connection requires:

• TS
• TRS
• Instrument level
• Line level
• Speaker level

before manufacturing the cable.

TS vs TRS

The NP2XL is specifically:

2-pole / TS.

It is not a three-contact TRS connector.

Where the equipment requires:

• Balanced audio
• Stereo
• Insert wiring
• Other three-contact applications

select the corresponding:

Neutrik NP3XL

3-pole jumboPLUG.

NP2XL

• 2 poles
• TS
• Mono-style connection

NP3XL

• 3 poles
• TRS
• Stereo / balanced / three-contact applications

Select according to the required electrical connection.

Precision-Machined One-Piece Contact

Neutrik uses a:

Precision-machined one-piece contact

in the NP2XL.

This avoids the traditional riveted tip construction found in some lower-cost ¼-inch plugs.

Neutrik specifically designed this contact architecture to help avoid the plug tip:

• Catching inside the jack socket
• Separating from the connector

during repeated professional use.

Avoids Riveted Tip Construction

Some conventional phone plugs use a separate tip component held mechanically to the main contact.

Neutrik’s one-piece machined construction eliminates that riveted joint.

For professional production cables, this removes one potential mechanical failure point from the connector.

Nickel Shell and Nickel Contacts

Neutrik’s professional Plug & Jack product guide identifies the NP2XL with:

Nickel shell
Nickel contacts

and a:

Black bushing.

The current 2026 product datasheet describes the shell as a robust die-cast construction.

This gives the NP2XL the familiar professional Neutrik appearance while maintaining a mechanically robust plug body.

Robust Die-Cast Shell

Neutrik specifically lists:

Robust die-cast shell in stylish design

among the NP2XL’s key features.

The metal connector body is intended for professional applications where the plug may be exposed to repeated:

• Handling
• Connection
• Disconnection
• Touring
• Transport
• Workshop servicing

Solder Termination

The NP2XL uses:

Solder termination.

Professional cable assembly should include:

• Correct cable stripping
• Clean conductor preparation
• Correct tip and sleeve identification
• Controlled soldering temperature
• Proper solder flow
• No stray strands
• No solder bridges
• Correct strain-relief assembly

Tip / Sleeve Wiring

For a conventional unbalanced mono connection:

Tip: Signal
Sleeve: Ground / return

For speaker-level or specialised equipment connections, follow the equipment manufacturer’s wiring instructions.

Do not assume every two-conductor 6.35mm cable uses the same electrical convention.

Rated Current Depends on the Mating Connector

Neutrik does not publish one fixed current rating for the NP2XL alone.

The manufacturer specifies:

Rated current per contact: depends on mating connector.

This is particularly important for loudspeaker applications.

A high-current rating should not be invented for the NP2XL without considering the actual jack socket it mates with.

The complete connection is limited by its lowest-rated component.

Contact Resistance Depends on the Mating Connector

Neutrik also specifies:

Contact resistance: depends on mating connector.

This makes sense because electrical contact occurs between both:

• NP2XL plug
• Mating jack socket

The quality and condition of the socket therefore contribute to the overall connection resistance.

Rated Voltage Below 50V

Neutrik specifies:

Rated Voltage: <50V.

This means the NP2XL is designed for professional low-voltage audio and signal applications.

It is not suitable for:

• 230/240V mains power
• Appliance power
• General electrical distribution
• Lighting mains power

The fact that it has a published dielectric-strength test does not make it a mains connector.

1kV DC Dielectric Strength

Neutrik specifies:

Dielectric Strength: 1kV DC.

This is a component electrical test specification.

It should not be interpreted as a working-voltage capability.

The actual rated voltage remains:

Below 50V.

Insulation Resistance

Neutrik specifies:

>2GΩ initially

and:

≥1GΩ after damp-heat testing.

This describes the electrical insulation between the contact elements under the manufacturer's test conditions.

More Than 1,000 Mating Cycles

The NP2XL is rated for:

More than 1,000 mating cycles.

This makes it well suited to professional cables that are regularly:

• Plugged in
• Removed
• Packed
• Transported
• Reinstalled

Actual service life depends on both the plug and mating socket being maintained in good condition.

Temperature Range

Neutrik specifies:

-20°C to +65°C.

The completed cable assembly may have a different operating-temperature range depending on the selected cable.

Always design to the lowest-rated component in the complete assembly.

IEC 60603-11 Compliance

Neutrik specifies compliance with:

IEC 60603-11

for the NP2XL.

EIA RS-453 Compliance

Neutrik additionally identifies:

EIA RS-453

as a compatible standard.

These standards relate to the professional phone-plug format.

Touring and Live Sound

The NP2XL is particularly useful where touring systems require cables with larger and more rugged outer jackets.

Potential applications include:

• Instrument leads
• Amplifier cables
• Equipment-specific loudspeaker leads
• Stage systems
• Backline systems

Professional touring cables are repeatedly:

• Deployed
• Connected
• Disconnected
• Coiled
• Transported
• Repaired

The combination of metal shell, chuck-type strain relief and one-piece contact construction makes the NP2XL appropriate for this kind of repeated handling.

Theatre

Theatre departments may encounter thick 6.35mm cables around:

• Backline
• Musical instruments
• Amplifiers
• Playback systems
• Stage audio
• Legacy equipment

The field-serviceable solder construction also allows venue technicians to repair cable assemblies when necessary.

Recording Studios

Studio applications may include:

• Instrument cables
• Amplifier connections
• Custom patch cables
• Specialised equipment leads
• Legacy audio equipment

where a larger cable requires more room than the standard PX connector provides.

Film and Television

Film and television audio departments may use specialised heavy-duty cable around:

• Playback systems
• Instrument systems
• Studio equipment
• Location systems
• Technical racks

The NP2XL provides a professional 6.35mm termination where thick cable is required.

Broadcast

Broadcast facilities may still contain equipment using ¼-inch audio connections.

The jumboPLUG can be useful where custom or rugged cable construction requires a larger cable entry than a conventional plug provides.

Professional AV

Professional AV applications may include:

• Amplifier connections
• Rack equipment
• Installed audio
• Playback systems
• Specialised interconnects

where the equipment requires a TS connection and the cable diameter approaches 10mm.

Equipment-Hire Companies

Hire and production companies may use NP2XL for:

• Heavy-duty custom leads
• Backline cables
• Large-diameter instrument cables
• Equipment-specific speaker leads
• Cable repairs
• Workshop stock

Its serviceable construction allows a damaged cable to be repaired rather than automatically discarded.

Cable-Building Workshops

The NP2XL is particularly useful for professional cable workshops because it solves a common problem:

How do you terminate a genuinely thick cable into a professional ¼-inch plug?

Instead of trimming or compressing the cable jacket to force it into a smaller connector, the jumboPLUG provides the necessary physical capacity.

HTXX-14 Assembly Tool

Neutrik lists the:

HTXX-14

as the dedicated hand tool for tightening the bushing of:

• XX-14 Series XLR connectors
• jumboPLUG connectors
• etherCON CAT6A connectors

For workshops assembling larger quantities of NP2XL plugs, the correct tightening tool can help improve assembly consistency.

NP2XL vs NP2X

The distinction between these models is primarily cable capacity.

NP2XL – jumboPLUG

• 2-pole TS
• Up to 10mm cable O.D.
• 1.0mm² / 18 AWG maximum conductor
• Enlarged ergonomic barrel
• Nickel shell
• Nickel contacts
• Designed for thick instrument and loudspeaker cable

NP2X – Plug X

• 2-pole TS
• Standard 4–7mm cable O.D.
• 1.0mm² / 18 AWG maximum conductor
• Slim 14.5mm shell
• Designed for high-density jackfields
• Standard professional instrument/audio cable

Choose the NP2XL when cable diameter—not connector density—is the main requirement.

NP2XL vs NP3XL

Neutrik offers two current jumboPLUG configurations:

NP2XL

2 poles – TS / mono

NP3XL

3 poles – TRS / stereo or balanced

Both accept cable up to 10mm O.D.

Choose according to the actual electrical connection required.

Not a High-Density Jackfield Plug

Unlike the standard NP2X, the NP2XL is not designed primarily around the extremely slim 14.5mm shell required for dense 15.88mm jackfields.

Its priority is:

Accommodating thick cable up to 10mm.

For high-density patching using conventional-size cable, NP2X may be the more suitable option.

For oversized cable, NP2XL is the purpose-designed solution.

Cable Assembly

When assembling the NP2XL:

1. Confirm the equipment requires a 2-pole TS connection.
2. Confirm cable O.D. does not exceed 10mm.
3. Confirm conductors do not exceed 1.0mm² / 18 AWG.
4. Disassemble the connector.
5. Slide the bushing and strain-relief components onto the cable.
6. Strip the cable appropriately.
7. Prepare the tip and sleeve conductors.
8. Solder the conductors cleanly.
9. Inspect for stray strands or solder bridges.
10. Position the chuck strain relief correctly around the cable jacket.
11. Assemble and tighten the connector.
12. Test the finished cable before use.

Follow Neutrik’s current assembly instructions when manufacturing professional cable inventory.

Test Every Completed Cable

After assembly, check:

• Tip-to-tip continuity
• Sleeve-to-sleeve continuity
• No tip-to-sleeve short
• Mechanical cable retention
• Connector assembly
• Correct equipment compatibility

For speaker-level applications, also confirm the complete plug-and-socket system is appropriate for the intended load.

Product Specifications

Brand: Neutrik
Model: NP2XL
Series: jumboPLUG
Product Type: Professional 6.35mm phone plug
Connector Size: 6.35mm / ¼ inch
Number of Poles: 2
Configuration: TS / mono
Cable O.D.: Up to 10mm
Maximum Conductor Size: 1.0mm² / 18 AWG
Termination: Solder
Shell: Robust die-cast construction
Shell Finish: Nickel
Contacts: Nickel
Bushing: Black
Strain Relief: Chuck-type
Contact Resistance: Depends on mating connector
Rated Current: Depends on mating connector
Dielectric Strength: 1kV DC
Insulation Resistance: >2GΩ initial / ≥1GΩ after damp-heat test
Rated Voltage: <50V
Mechanical Life: >1,000 mating cycles
Standard Compliance: IEC 60603-11 / EIA RS-453
Temperature Range: -20°C to +65°C
Assembly Tool: Neutrik HTXX-14

Why Choose the Neutrik NP2XL?

Choose the NP2XL where a professional 6.35mm TS cable requires:

• Genuine Neutrik quality
• Cable capacity up to 10mm O.D.
• 2-pole TS / mono configuration
• Professional jumboPLUG construction
• Large ergonomic barrel
• Robust die-cast shell
• Nickel finish
• Nickel contacts
• Precision-machined one-piece contact
• No riveted tip construction
• Chuck-type strain relief
• Maximum conductor size of 1.0mm² / 18 AWG
• More than 1,000 mating cycles
• Field-serviceable solder termination
• Professional instrument and equipment-specific loudspeaker cable suitability

It is particularly useful where a heavy-duty cable is simply too large for a standard professional 6.35mm plug.

Why Buy Neutrik NP2XL from GigLife?

GigLife supplies professional connectors, adaptors, cables, tapes, consumables and technical accessories specifically for the entertainment and production industries.

With more than 25 years of hands-on live entertainment industry experience, GigLife understands that connector selection has to match the cable as well as the equipment. Trying to force a heavy-duty cable into an undersized connector is not a professional solution—the connector needs to be designed for the cable construction being used.

Products are selected by people who work in production and understand the requirements of:

• Audio engineers
• Musicians
• Backline technicians
• FOH engineers
• Monitor engineers
• Theatre technicians
• Touring crews
• Production companies
• Recording studios
• Broadcast facilities
• Film and television departments
• AV technicians
• Festivals
• Schools and performing arts centres
• Conference production
• Exhibition contractors
• Equipment-hire businesses
• Cable manufacturers and repair workshops

Whether you are building a heavy-duty instrument cable, maintaining backline inventory, terminating an equipment-specific speaker lead or restocking a professional workshop, GigLife supplies genuine components selected by people who understand the job.

Orders are dispatched from Brisbane, with Australia-wide shipping available.

GigLife is proudly by the professionals… for the professionals.